Connect your Witei feed to The NLS

Activate the XML interconnection under Settings, Property Manager, Interconnections in Witei, copy the XML link of publication, tick the XML icon on each property, and paste the link into Inbound Feeds.

Witei has a self-service Kyero version 3 XML. You switch it on yourself, copy its link and choose which properties it carries, with no support request needed.

The XML regenerates every 60 minutes and carries up to 50 photos per property. You paste the link into Inbound Feeds on The NLS.

1. 1

   Activate the XML and copy its link

   In Witei go to Settings, Property Manager, Interconnections. Activate the XML interconnection, choosing all properties or a manual selection.

   Back in Interconnections, open the XML row, click the gear under Options and choose Copy XML link of publication. That is the address for The NLS.

2. 2

   Choose which properties go through

   In the property list, click the XML icon on each property to include it. Green means it is being sent, grey means it is not. The three dots next to a property publish or unpublish in bulk.

   The XML refreshes every hour, so a property you tick now is in the feed within the hour.

3. 3

   Add the feed in Inbound Feeds

   On The NLS, go to My Listings and choose Inbound Feeds in the menu on the left. Click + Add feed. Paste the address Witei gave you into Feed URL. It must start with https://. Type a name you will recognise into Feed name, for example Witei sales, then click Add Feed.

   Your feed appears in the list and the first import starts straight away. From then on The NLS re-reads it every 24 hours.

   Note Leave Manage inventory manually switched off. It pauses feed imports and is meant for agents who add every listing by hand.

4. 4

   Import only some properties, if you want

   Further down the page, under Reference allowlist, click + Add reference and enter a property reference exactly as it appears in Witei. Add one reference at a time. Only the references you list are imported.

   Leave the list empty to take the whole feed. Most agents do, and choose which properties travel inside their CRM instead.

5. 5

   Check the listings arrived

   The panel on the right of Inbound Feeds shows the import as it runs: how many properties and images have been processed, and when the last import finished. When it has run, open My Listings. Each imported property is there as a draft, and its photos follow within about two hours.

   If you have just changed something in Witei, click Refresh Feeds to import straight away instead of waiting for the next daily read. The XML regenerates every 60 minutes, so wait an hour after a change before you refresh.

6. 6

   Finish each draft before it goes live

   Imported listings wait as drafts until three things are confirmed: the property's address, the listing agreement with the seller, and the agreement's expiry date. Open each draft in My Listings, confirm the three and publish it. Very large imports can take up to 24 hours to finish arriving.

   A listing that later disappears from your feed is withdrawn on The NLS automatically, and republished if it comes back. You do not need to remove it by hand.